DIY Popsicle Stick Jewelry Box

Should you ask me, popsicle sticks are one of the vital enjoyable crafting provides you possibly can presumably use, even when they don’t see prefer it at first! There are simply so many neat issues you can also make out of them that the choices principally really feel limitless. Recently, I’ve been discovering them further helpful as a result of my youngsters have been feeling very enthusiastic certainly about tasks that contain really constructing one thing moderately than simply making, say, a flat 2D portray. That’s how I got here up with the concept of educating them how one can make a popsicle stick jewellery field!

Try these step-by-step directions full with pictures. Should you’d moderately observe together with a video tutorial since you’re extra of a visible learner, scroll to the underside of this put up to seek out what you’re searching for.

For this challenge, you’ll want:

  • Popsicle sticks
  • Paint (white, pink, and blue)
  • A paintbrush
  • Purple card
  • Ribbons (yellow, pink, inexperienced, blue, and white)
  • Scissors
  • 4 small rhinestones
  • Scorching glue

Diy popsicle stick jewelry box top

Step 1:

Collect your supplies!

Diy popsicle stick jewelry box materials

Step 2:

Paint your popsicle sticks! I made a decision to make my popsicle stick jewellery field from a mix of pure wanting unpainted sticks and sticks painted blue, white, and pink. To start out, I painted six blue sticks, eight white sticks, and twelve pink sticks.

Diy popsicle stick jewelry box paint

Diy popsicle stick jewelry box step 2 painting

Step 3:

Make the underside of your jewellery field. Place two pure colored popsicle sticks down in your work floor simply far sufficient aside that they’re virtually the size of one other popsicle stick for those who had been to position it horizontally between them, however with a little bit of overlap at their ends. Then take one other pure popsicle stick, place glue about two centimetres from the ends, and stick it down on high of the 2 facet sticks so their rounded ends stand out from beneath its edge about the identical quantity as that horizontal stick’s personal ends move the perimeters of the 2 vertical ones on the facet. This establishes the dimensions and form of your field and lid, like a base. Hold gluing extra naturally colored horizontal sticks so that they sit throughout the house between the vertical ones, all the best way down till solely the identical little bit of the ends is seen as there may be on the high. I glued down eight sticks in complete. Be sure that your sticks’ edges sit flush towards those on both facet of it, in addition to that their ends line up evenly down both sides.

Diy popsicle stick jewelry box step 3 attach

Step 4:

Flip your newly completed field backside over so the vertical sticks are seen on high now. Glue a stick down horizontally, in the identical place and method such as you did earlier than. Repeat the method throughout the bottom on the different finish; you now have two horizontal sticks that line up completely together with your high and backside sticks on the underside. Be at liberty to make use of no matter color you please; I alternated and randomized my colors from right here on out to make a cute and prettily scattered multi-coloured impact. Subsequent, glue a vertically positioned stick down at every finish of that first horizontal one so that every one traces up with these first two vertical sticks you positioned down on the very starting. You’ve formally established the perimeters of your field!

Diy popsicle stick jewelry box step 4 glue

Diy popsicle stick jewelry box step 4

Step 5:

Repeat the brand new course of outlined above, alternating with two horizontal sticks after which two vertical sticks, glued finish to finish and lined up proper on high of those under. You’ll be able to nonetheless swap stick colors nonetheless you please. Proceed till your field edges are as excessive as you need them to be; my field had 14 extra stacked layers in addition to the preliminary backside layer I constructed.

Diy popsicle stick jewelry box color

Diy popsicle stick jewelry box angle view

Step 6:

Construct your jewellery field’s lid by repeating the identical course of as you adopted initially whenever you constructed the underside of your field. This time, I used colored sticks as properly, moderately than simply pure, unpainted ones like I did earlier than. My lid was eight horizontal sticks down, identical to my base was.

Diy popsicle stick jewelry box mixed colors

Step 7:

Take your whole ribbons besides your pink one (you’ll use that for one thing else later) and lower them into small items. I did this by measuring out and chopping a chunk about an inch lengthy from the top of every after which utilizing that as a template to measure every extra piece I lower from that color of ribbon. As soon as I’d lower the primary one into a number of inch lengthy items, I repeated the method with every of my different colors (inexperienced, yellow, blue, and white).

Diy popsicle stick jewelry box ribbon

Diy popsicle stick jewelry box step 7

Step 8:

Flip every of your inch lengthy items, in all colors, into somewhat loop. Do that by making use of somewhat dot of glue close to one finish and, with out twisting the piece, carry the opposite finish round and stick it on to, this making somewhat curved loop. Repeat this course of till your whole items in every color of ribbon have become loops.

Diy popsicle stick jewelry box step 8

Diy popsicle stick jewelry box step 8 all


Step 9:

Use your scissors to chop a circle about half an inch extensive out of your purple card. You’ll use this as the bottom for making your first looped ribbon flower.

Diy popsicle stick jewelry box cardboard

Step 10:

Apply a dot of glue to the again sides of your ribbon loops, one after the other, on the top the place the perimeters overlap, then stick every one down all the best way across the paper circle. When you’ve performed your first layer, repeat the method to make a second layer on high. I did three layers for every of my flowers to make them good and voluminous. If you’re performed stick a rhinestone down within the centre.

Diy popsicle stick jewelry box step 10

Diy popsicle stick jewelry box bow

Diy popsicle stick jewelry box flower

Step 11:

Repeat the entire flower course of three extra instances so that you’ve got a complete of 4 looped ribbon flowers with rhinestone centres.

Diy popsicle stick jewelry box all

Step 12:

Reduce a two inch piece out of your pink ribbon and, from the highest facet of your lid, slide the ends via the house between the 2 center sticks close to the centre so a loop is created. Flip the lid over and use your sizzling glue gun to stay the ends down on the opposite facet to maintain the loop in place. Your jewellery field now has a lid deal with!

Diy popsicle stick jewelry box step 12

Diy popsicle stick jewelry box attach

Step 13:

Apply glue to the underside or again of every flower, on the purple card base. Stick every one down in one of many 4 corners of the lid after which place the lid on the field.

Diy popsicle stick jewelry box flowers

Diy popsicle stick jewelry box custom

You’re all completed! Be at liberty to customise this concept through the use of no matter colors you want greatest for those who’re not feeling my white, pink, and blue scheme. Simply in case you’d like to do this challenge out for your self, right here’s a improbable tutorial video that will help you!

Diy popsicle stick jewelry box hanging

The put up DIY Popsicle Stick Jewellery Field appeared first on

Leave a Reply

Your email address will not be published. Required fields are marked *